Detroit Diesel EPA04 MBE 900 Operator'S Manual Download Page 63

Page: 63 / 121

MBE 900 OPERATOR'S MANUAL

Problem—The Engine Exhaust Is Blue

Cause

Remedy

The engine oil level is too high
(engine oil is reaching the combustion
chamber).

Adjust the oil level, and then have the
oil level checked by an authorized
dealer.

The turbocharger is leaking oil.

Have an authorized dealer replace the
turbocharger

The valve stem seals are loose or
damaged.

Have an authorized dealer replace the
seals.

The piston rings are worn.

Have an authorized dealer replace the
piston rings.

Problem—Engine Brake Performance Is Poor

Cause

Remedy

The engine brake control switch is
damaged.

Replace the switch

The exhaust brake is not operating
properly.

Have an authorized dealer check the
operation of the valve.

The constant-throttle valves are
malfunctioning.

Bring the vehicle to an authorized
dealer for service.

Components of the DDEC-ECU and/or
DDEC-VCU are damaged.

Bring the vehicle to an authorized
dealer for service.

Problem—Cruise Control Is Not Working

Cause

Remedy

One or more of the cruise control
switches are damaged.

Replace the damaged switch.

Components of the DDEC-ECU and/or
DDEC-VCU are damaged or not
working properly.

Bring the vehicle to an authorized
dealer for service.

All information subject to change without notice.

(Rev. )

DDC-SVC-MAN-0055

Summary of Contents for EPA04 MBE 900
























































































































Search results

Summary of Contents for EPA04 MBE 900

Reviews:

Brands by name

Popular brands

Detroit Diesel EPA04 MBE 900, Operator'S Manual

Search results

Summary of Contents for EPA04 MBE 900

Reviews:

Brands by name

Popular brands