Detroit Diesel EPA04 MBE 900 Operator'S Manual Download Page 120

Page: 120 / 121

LIMITED WARRANTY ON NEW DETROIT DIESEL MBE 900 ENGINES USED
IN UNIMOG APPLICATIONS

Warranty Period

Warranty Limitations

(Whichever Occurs First)

Repair Charges to

be Paid by Owner

Item

Months

Hours

Miles/

Kilometers

Parts

Labor

Engine

Unlimited

No Charge

Charge

Accessories

Unlimited

No Charge

Charge

Table 34 Warranty Period Chart — UNIMOG Applications

Like Replacement Engine

Engine(s) supplied by DDC as a
replacement for an engine still under
warranty will assume the identity
of the engine being replaced and be
entitled to the remaining warranty
coverage.

Service Supplies

The cost of service supplies such
as coolant, oil and

lters which are

not reusable due to needed warranty
repairs is covered by this warranty.

Engine Removal and
Reinstallation

Reasonable labor costs for engine
removal and reinstallation, when
necessary to make a warranty repair,
are covered by this warranty.

This Warranty Does Not

Cover:

Repairs Due to Accidents,
Misuse, Storage Damage,
Negligence or Certain
Modi

cations

Repairs due to an accident, misuse,
misapplication, storage damage,
negligence or modi

cation exceeding

DDC speci

cations are not covered by

this warranty.

110

All information subject to change without notice.

(Rev. )

DDC-SVC-MAN-0055

Summary of Contents for EPA04 MBE 900
























































































































Search results

Summary of Contents for EPA04 MBE 900

Reviews:

Brands by name

Popular brands

Detroit Diesel EPA04 MBE 900, Operator'S Manual

Search results

Summary of Contents for EPA04 MBE 900

Reviews:

Brands by name

Popular brands