DETEWE opencom 100, Mounting And Commissioning Manual

Page: 56 / 136

54
Configuring the OpenCom 100 Configuration
Configuring the OpenCom 100
Preparing the
Configuration
Before starting with the configura-
tion, make sure you have the follow-
ing documents at hand:
■
An overview of the ports
■
A list of the terminals to be con-
nected
■
A list of the IPEIs, if you wish to
log on DECT terminals in the se-
cure procedure
■
A list of the users to be set up
(staff entitled to use the services
of the OpenCom 100) with their
names, departments, and the in-
ternal call numbers you want to
allocate to them
■
For Internet access: the Internet
service provider access data.
Data not available for first-time con-
figuration can be updated or cor-
rected at a later date.
Note: Use the Configuration Guide
starting on page 111. This will assist
you in making the settings in the cor-
rect sequence.
Starting the Web Console
1. Start your Web browser. Enter
the OpenCom 100 IP address in
the “Address” box:
http://192.168.99.254/.
If the configuration PC gets its IP
address automatically from the
OpenCom 100 or if the
OpenCom 100 is entered as the
domain name server, you can
also start the Web console by
entering the DNS name. The
DNS name in the factory setting
is
host.domain . You can change
this in the Configurator ( NET
Configuration: Easy Access
menu).
2. The OpenCom 100 Web console
is started. First set the country in
which you are operating the
OpenCom 100, and in which lan-
guage the Web console is to be
displayed.