DETEWE opencom 100 Mounting And Commissioning Manual Download Page 19

Page: 19 / 136

Installation

Declarations of Conformity

The OpenCom 100 is designed for in-
door use only. Lay the cables so that
they cannot be walked on or tripped
over.

The connection of external devices
to the sensor/actor should be per-
formed by a qualified electrician.

Declarations of Conformity

The OpenCom 107, OpenCom 105,
OpenCom 110 and OpenCom 120
systems conform to the require-
ments set down in the EU directive
99/5/EC.

The Declaration of Conformity can
be viewed at the DeTeWe Web site at
http://www.detewe.de.

Mounting Location

The ambient temperature for oper-
ating the OpenCom 100 must be be-
tween +5 and +40°C. The power
supply must be 230 V/50 Hz AC. A
separate fuse for the power supply is
recommended.

To maintain the prescribed ambient
temperature, mount the
OpenCom 100 in a well-ventilated
location, away from direct sources of
heat.

Do not position the OpenCom 100

■

in front of or above heat sources
such as radiators,

■

in direct sunlight,

■

behind curtains,

■

in small, unventilated, damp
rooms,

■

on or near inflammable materi-
als,

■

or near high-frequency devices
such as transmitters, X-ray or
similar apparatus.

Use a separate 230 V power circuit
and install overvoltage protection.

Summary of Contents for opencom 100









































































































































Search results

Summary of Contents for opencom 100

Reviews:

Related manuals for opencom 100

Brands by name

Popular brands

DETEWE opencom 100, Mounting And Commissioning Manual

Search results

Summary of Contents for opencom 100

Reviews:

Related manuals for opencom 100

Brands by name

Popular brands