DS7400Xi-AT (Ver. 3+) Reference Guide Copyright © 1995-2000 Detection Systems, Inc. Page 52
11.27 Report Programming: Program Addresses (0256-0304 and 0320-0340)
• To send RF zone trouble reports, the System Trouble Report, address 0334, must be programmed.
• To send the User number along with open, close, or partial close reports: place an ‘F’ (*5) in the extended digit.
• To disable a report (meaning nothing will be sent); place a ‘0’ (zero) in the reporting digit.
• When using SIA, place a ‘1’ in the reporting digit and program the extended digit to use the extended SIA codes. For Contact ID format,
place a ‘1’ in the reporting digit of each report you wish to enable. It is not necessary to program the extended digit.
• For suggested values for 4/2, BFSK and Pager format, see section 13.1-13.3. For SIA and Contact ID, the values sent are listed in
section 14.1. For other formats, consult your central station.
• HEX values: Some Data Digit values are higher than 9. These values are programmed by pressing the [*] key followed by another
number. These values will display as HEX characters when entered. The HEX character values are as follows:
*0 = A
*1 = B
*2 = C
*3 = D
*4 = E
*5 = F
See Glossary (section 6.13) for further details.
Summary of Contents for DS7400Xi-AT
Page 96: ...DETECTION SYSTEMS INC...
