9
Overview of the product
C.
front panel functional keys
MODE
This button is used to switch among CNT mode (count), SDC mode (Single
Denomination Count) & MDC mode (Mixed Denomination Count)
START
This button is used to start counting when notes are placed on the Hopper. It also
allows the user to switch from Auto (default) to Manual counting by pressing the Start
button long enough (over 5 seconds) until it switches to Manual and then release the
button. Repeat this exercise If you need to switch back to Auto.
CUR
This button is used to display available currencies and allow you to choose the
required counting currency by pressing the arrow keys (Up and Down). Press Ok to
confirm your selection
e g
e
e
e
e
d
e
e
e
e
de
de
BATCH
This button is used to switch ON/OFF the batch mode. This function is used to
create stacks of an equal number of notes. When BATCH is on, 200pcs is shown as
default on the display. Use the arrow keys (Up and Down) to adjust the batch number.
Press
OK
to confirm your selection and start the count. You will get a notification on
the display when the batch is complete
ADD
This button is used to switch on/off the Add function. It allows you to Add an
additional stack of notes without resetting the previous count. The total value count
will be the result of multiple counts. You can use ADD along with the BATCH function
SORT
This button is used to turn on/off the face or orientation sorting function under the
main interface. The Face feature sort notes with the same side. The Orientation
feature sort notes in the same direction and side. All other notes go automatically
to the Reject Pocket.
REPORT
Press to check the counting report: the report screen shows the amount and value
per Denomination and the total quantity of notes (PCS)
Press twice to check notes Serial Numbers.
Press three times to check the Error Report.
e e e
d
E
e
e e
ee
e e e
e
d d