6
instructions before the operation
A.
Package contents:
e
e
E e
ed
e
g
d e
e
d
e
d
e
B.
UNPACKING
After unpacking the machine, please store the box and the packing material for fu-
ture use. Failing to ship the machine back in its original machine box, Styrofoam and
packing material will void the machine’s warranty.
C.
installation
Please follow below step by step instructions:
1.
Place the machine on a solid flat surface before using.
2.
Please review the safety considerations to carefully chose an appropriate work-
space. environment to operate the machine.
3.
Connect the power cord to machine power supply port (back of the machine).
4.
Connect the power cord to a grounded wall outlet or ground protection socket.
5.
Ensure voltage operating range: AC 100~240V / 50~60HZ.
6.
Turn the machine ON and verify if its functioning properly. In case of any error
msg, please contact the service center for help.
NOTE: WHEN REPLACING FUSES, MAKE SURE TO USE THE SAME TYPE AND RA
-
TING
(
F3A~250V
)
. THE FUSES ARE LOCATED IN THE POWER JACK COMPARTMENT.
D.
notes selection
To ensure a trouble-free operation before starting, please make sure to:
1.
Tidy up the notes on an even desk.
2.
Set the position of the counting guide (refer to main parts overview) to be 2mm
to 3mm longer than the notes to be counted.
3.
Place the notes onto the hopper stage of the machine and start the count.
4.
The results will be displayed on the screen. Press Report to get a detailed count
result.
Careful considerations
•
Avoid counting wet, excessively dirty, folded or curved notes.
•
Fan each bundle of notes before counting in the case the notes are slightly ad-
hesive one each other.
•
Check for foreign objects mixed up with the notes like paper clips, rubber bands,
pieces of paper, etc.
