12
operation
A.
Operation Modes
Press the MODE Button sequentially to select the desired operating mode. You can
find the selection on the top right of the display
CNT mode
:
This mode is used to derive the quantity of notes counted (PCs). It
works on all notes even for currencies that are not programmed on this machi-
ne. Under this mode, the machine works as a conventional note counter (note
that all the detection functions are disabled in this mode). It’s also used in case
the fitness condition of the notes is poor and not well recognized (rejected)
in
MDC mode. You can select 3 different counting speeds 800, 1000 and 1200
notes/min. In this mode, you can switch
ADD or BATCH or ADD+BATCH
functions
SDC mode:
Press button MODE to select SDC mode. This mode is used to count
single denomination notes. The system will take the first note as the bench-
mark, and will send the different straight to the reject pocket. The result will be
the Total amount of money (Total Value) and quantity of notes (PCs) coun-ted
for the same denomination. You can select 2 different counting speeds
800
and 1000 notes/min. In this mode, you can switch
ADD or BATCH or
ADD
+BATCH functions
MDC mode:
Press button MODE to select MDC mode. This mode is used for value
counting of Mixed Denomination notes. Press REPORT button to check the
counting details. The result is the Total amount of money (Total value) as well
as quantity of notes (PCs) counted. You can select 2 different counting speeds
800 and 1000 notes/min. In this mode, you can switch ADD or BATCH or
ADD+BATCH functions
B.
Counting operation
1.
Proceed to turn the machine ON.
2.
The machine will start with a short Self-Test routine to confirm the proper
operation of all its module before starting the counting. If any error is reported,
check the ERROR MESSAGES section for solving the problem.
3.
Select the required Currency (for multi-currency models) as well as the opera-
ting mode (CNT-SDC-MDC)
4.
Set up the rest of the options like SPEED, BATCH/ADD and SORT based on your
own needs.
5.
Place the notes orderly in the hopper and the machine will start counting
them automatically.
6.
NOTE:
If the machine is set up in MANUAL, you must press START to begin the
counting operation.
