Deta SILENT 100 12V, User Instructions

Page: 34 / 41

34
07 / 14
8
SILENT axial extractor fans
Please read this instruction booklet
carefully before installing or starting up
the product. It contains important
information on personal and user safety
measures to be followed whilst installing,
using and carrying out maintenance work
on the equipment.
The SILENT extractor fans have been
manufactured following current technical
safety regulations, production and quality
standards as laid down by the
international Quality Standard ISO 9001.
All components have been checked and
every one of the final products will have
been individually tested at the end of the
manufacturing process.
Check that the product is in perfect
condition while unpacking. Make sure
that the product corresponds to the one
you have ordered and that the details on
the instruction plate fulfil your
requirements.
The installation and the disconnection
device of the fixed installation used must
be in accordance with the installation
regulations in force in each country. Once
the product has been installed, pass this
booklet to the end user.
Recommendations
IMPORTANT: Before
installing and wiring the
unit, ensure that the
mains supply is
disconnected.
Working ambient
temperature for fan
equipment should not be
exceeded. Typically, this
falls within -5°C to +40°C,
unless stated otherwise.
The spigot cannot be
connected to a duct which
is used to extract smoke
from gas or any other fuel
appliance.
The extractor must not be
used in explosive or
corrosive atmospheres.
If the SILENT fan is
operating in a room
where there is a boiler or
any other kind of
combustion device that
requires airflow to work,
check that the air inlets to
the room are sufficient.
This appliance can be
used by children aged