![background image](http://html.mh-extra.com/html/desa/vsgf28ntb/vsgf28ntb_owners-operating-and-installation-manual_2486131017.webp)
17
103415
INSTALLING
Continued
A.G.A. Design-Certified Manual
Shutoff Valve with 1/8" NPT Tap*
3" Minimum
From Gas Meter
(5" W.C. to 10.5" W.C.
Pressure)
Approved
Flexible Gas
Line
Tee Joint
Pipe Nipple
Cap
Sediment
Trap
Figure 18 - Gas Connection
Figure 19 - Removing Log Base Assembly From Fireplace
Continued
WARNING ICON
G 001
CAUTION
Do not pick up log base assembly by burners. This could damage
burners. Only handle base by grates.
Installation Items Needed
• 5/16" hex socket wrench or nut-driver
• Phillips screwdriver
• sealant (resistant to propane/LP gas, not provided)
1. Remove fireplace screen. Remove two screws that hold fireplace screen in place for ship-
ping. These screws are located near top of screen. Discard screws. Lift fireplace screen up
and pull out to remove.
2. Remove screws that attach log base assembly to fireplace (see Figure 19). Carefully lift up
log base assembly and remove from fireplace (see Figure 19).
Note:
If adding the G8000 series brick liner accessory, install it now. Follow instructions in
G8000 accessory kit.
CONNECTING FIREPLACE TO GAS SUPPLY
* Purchase the optional A.G.A. design-certified manual shutoff valve from your dealer. See
Accessories, page 34.