![background image](http://html.mh-extra.com/html/desa/vsgf28ntb/vsgf28ntb_owners-operating-and-installation-manual_2486131013.webp)
13
103415
INSTALLING
Continued
9. Attach flexible gas line to fireplace gas regulator. See Connecting Fireplace to Gas Supply,
page 17.
10. If blower is installed, route blower electrical cord through access holes in either side of fire-
place.
Note:
Bushing may be moved if necessary. Plug electrical cord into electrical outlet.
11. Carefully insert fireplace into cabinet mantel. Be careful not to scratch or damage hearth
base, cabinet mantel, or any laminate trim on hearth base. Remove protective material from
top of hearth base and from front of fireplace (if any). Note: You can secure fireplace to
hearth or floor. Open lower louver. Locate screw holes in bottom of base. Tighten wood
screws through these holes and into hearth or floor.
12. Check all gas connections for leaks. See Checking Gas Connections, page 18.
Continued
Figure 12 - Inserting Fireplace Into Cabinet Mantel
,,,,,
,,,,,
QQQQQ
QQQQQ
¢¢¢¢¢
¢¢¢¢¢
,,,
,,,
,,,
,,,
,,,
QQQ
QQQ
QQQ
QQQ
QQQ
¢¢¢
¢¢¢
¢¢¢
¢¢¢
¢¢¢
1. Frame in rough opening. Use dimensions shown in Figure 13 for the rough opening.
35 1/2"
17 3/4"
33"
Figure 13 - Rough Opening for Installing in Wall
BUILT-IN FIREPLACE INSTALLATION
Built-in installation of this fireplace involves installing fireplace into a framed-in enclosure.
This makes the front of fireplace flush with wall. If installing a mantel above the fireplace, but
you must follow the clearances shown in Figure 16, page 15. Follow the instructions below to
install the fireplace in this manner.
Height
Front Width
Depth
Actual Framing Actual
Framing Actual
Framing
32
3
/
8
" 33"
34
5
/
16
" 35
1
/
2
"
16
11
/
16
" 17
3
/
4
"