![background image](http://html.mh-extra.com/html/desa/vsgf28ntb/vsgf28ntb_owners-operating-and-installation-manual_2486131005.webp)
5
103415
LOCAL CODES
Install and use fireplace with care. Follow all local codes. In the absence of local codes, use the
latest edition of The National Fuel Gas Code ANSI Z223, also known as NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
PRODUCT
FEATURES
UNPACKING
1. With utility knife, cut the carton all the way around above the staples on the bottom tray. Lift
the carton off the heater. Remove packing.
Note:
The hood is located in the packing on the
right hand side of the heater front. Lift the heater off the bottom tray.
2. Locate two screws above top corners of the fireplace screen. Remove and discard these
screws. Lift fireplace screen up and pull out to remove.
3. Remove protective packaging applied to logs, log base assembly, and fireplace.
4. Remove fireplace hood from carton insert.
5. Check all items for any shipping damage. If damaged, promptly inform dealer where you
bought fireplace.
Operation
This vent-free fireplace is clean burning. It requires no outside venting. There is no heat loss out
a vent or up a chimney. Heat is generated by both realistic flames and glowing embers. When
used without the blower, the fireplace requires no electricity making it ideal for emergency
back-up heat.
Safety Device
This fireplace has a pilot with an Oxygen Depletion Sensor Shutoff System (ODS). The ODS/
pilot is a required feature for vent-free room heaters. The ODS system shuts off the fireplace if
there is not enough fresh air.
Piezo Ignition System
This fireplace has a piezo ignitor. This system requires no matches, batteries, or other sources to
light fireplace.
Blower Assembly (VSGF28PTB/CSGF28PTB)
This fireplace has a blower assembly. The blower operates thermostatically. The blower circu-
lates heated air from the fireplace into the room. Use of blower is optional. An optional blower
accessory is available for models VSGF28PV/ CSGF28PV.
Thermostat Control Models (VSGF28PTB/CSGF28PTB)
These fireplaces have a thermostat sensing bulb and a control valve. The thermostat controls the
heat output and flame height. This maintains a consistent room temperature. Even the lowest
setting provides realistic flames and glowing embers from two burners. Selecting higher
comfort settings allows fireplace to run longer, producing greater heat output. At lower comfort
settings, the fireplace will run less. This results in increased heating comfort. This can also
result in lower gas bills.
Variable Manual Control (VSGF28PV/CSGF28PV)
These fireplaces have a variable manual control valve which allows the user to choose the heat
setting that best suits his needs. Any setting between low and high may be selected by simply
turning the control knob.