![background image](http://html.mh-extra.com/html/desa/ec18nr-pr/ec18nr-pr_owners-manual_2485858021.webp)
www.desatech.com
119162-01H
21
6
7
Figure 34 - Installing Logs #6 and #7
INSTALLATION
Continued
9..
Add embers to front flat burner. Gently re
-
move.embers.from.the.bag.using.gloves.or.
tweezers.
(This material is a skin irritant.
Gloves or tweezers are recommended
to prevent skin irritation).
. Separate.
pieces. of. ember. material. and. place. on.
surface of flat burner as shown in Figure
27, page 19. Apply four pieces to the front
ports.and.2.pieces.to.the.back.ports..Ad-
ditional.glowing.effect.can.be.achieved.by.
fraying.edges.of.ember.material.
WARNING: Do not operate unit
without ember material correctly
in place as shown in Figure 27,
page 19. Do NOT place ember
material anywhere else on unit.
Use only ember material supplied
with unit. Excessive or incorrectly
placed ember material may pro
-
duce carbon monoxide or soot.
WARNING: Do not use rock
wool or any other ember material
not supplied with this unit.
10..Add. lava. rock. and. small. decorative. logs.
around.base.of.heater.if.desired..
DO NOT
place rock or additional logs on front
burner or on logs
..Placing.any.material.
on.unit.other.than.ember.material.on.front.
burner.may.result.in.production.of.carbon.
monoxide. or. soot.. Use. lava. rock. to. hide.
wires.from.switch/log.to.control.valve..Place.
switch/log.so.the.switch.is.easy.to.access.
8
Figure 35 - Installing Log #8
Figure 36 - Correct VCC Log Placement
18".Models
2".Models
30".Models