![background image](http://html.mh-extra.com/html/desa/ec18nr-pr/ec18nr-pr_owners-manual_2485858024.webp)
www.desatech.com
119162-01H
2
OPERATION
Continued
TO TURN OFF GAS
TO AppLIANCE
1.. Turn.control.knob.clockwise.
.to.the.
OFF.position.
2a..Set.switch.in.the.OFF.position.
2b..
If. Using. Optional. Hand-Held. Remote:
. Set.
selector. switch. in. the. OFF. position. to.
prevent.draining.battery..
3.. Close.equipment.shutoff.valve.(see.Figure.
15, page 15).
MANUAL LIGHTING
pROCEDURE
1.. Follow.steps.1.through.6.under.
Lighting
Instructions
, page 22.
2.. Depress.control.knob.and.light.pilot.with.
match..
3.. Keep. control. knob. pressed. in. for. 30.
seconds.after.lighting.pilot..After.30.sec-
onds, release control knob. Now follow
steps 9 through 11,
Lighting Instructions
,
page.22.
OpTIONAL HAND-HELD
REMOTE OpERATION
Note: All remote control accessories must
be purchased separately (see Accessories,
page 37). Follow instructions included with
the remote control.
NOTICE: You must light the pilot
before using the hand-held re
-
mote control unit. See
Lighting
Instructions
on page 22.
After lighting, let pilot flame burn for about one
minute..Turn.control.knob.to.ON.position..Ad-
just flame adjustment knob anywhere between
HI. and. LO.. Slide. the. selector. switch. to. the.
REMOTE.position.(see.Figure.0)..
Note: The burner may light if hand-held re-
mote was on when selector switch was last
turned off. You can now turn the burner on and
off with the hand-held remote control unit.
.
IMPORTANT:.Do.not.leave.the.selector.switch.
in.the.REMOTE.or.ON.position.when.the.pilot.
is.not.lit..This.will.drain.the.battery.
ON/OFF SERIES (MODEL HRC100)
Hold. the. control. button. on. the. hand-held.
remote. until. burner. turns.on..Hold. the.con-
trol. button. again. until. burner. turns. off. (see.
Figure.1).
TO LOCK
.press.both.buttons.on.hand-held.
remote control until light stops flashing. Hand-
held remote control is now locked. If the fire
is.on.it.will.be.turned.off.automatically..In.the.
locked state, the light will not light up when
any.button.is.pressed..
TO UNLOCK
. press. both. buttons. together.
on. hand-held. remote. control. until. the. light.
stops flashing. The hand-held remote is now
unlocked.
Figure 40 - Control Knob, Ignitor Button
and Remote Selector Switch
Figure 41 - On/Off Hand-Held Remote
Control Unit
Control.
Button
Indicator.
Light
Selector.
Switch.
Control.
Knob.in.OFF.
Position.
Flame.
Adjustment.
Knob.
Ignitor
THERMOSTAT SERIES (MODEL
HRC200)
The. hand-held. remote. can. be. operated.
using. either. the. manual. mode. (MANU). or.
thermostatic mode (AUTO) (see Figure 42,
page. 25).. To. select. Fahrenheit/Centigrade.
mode display, carefully press the ˚C/˚F mode
button.with.the.end.of.a.paper.clip.or.similar.
blunt.object.