DEPURECO RAM 1000, Instruction And Maintenance Manual

Page: 61 / 113

Warning!
Before turning the vacuum on again, ensure that the pump has fully stopped.
Upon completing this operation, turn the master switch (1) to "0"
Use the handles (A) to move the vacuum — see figure
Warning!
During operation, prevent the hose from rolling up or bending
4.3 Emptying the container
Attention!
Wear PPE (gloves, dust mask, goggles, etc.) during this operation
When the container is full, the level sensor will automatically turn the vacuum off.
To empty the container, proceed as follows:
➢
as previously mentioned, the vacuum is locked by the levers located on the swivel casters
➢
bring the lever indicator to "BLOW"
24