DEPURECO RAM 1000, Instruction And Maintenance Manual

Page: 107 / 113

28
- Unscrew the mist filter (D) from the ring (C). Clean the filter with a jet of water with sufficient
pressure to remove any residues inside the filter.
To reassemble the filter
, operate in reverse order:
- screw the mist filter (C) on the support ring and reposition the latter inside the hatch
- position the head of the vacuum above the hatch, making sure that it is positioned as previously and
that the notches on the closure hooks are aligned with the proper closure hooks
- tighten the closure hooks
- connect the pump plug to the outlet on the electrical panel
- connect the vacuum cleaner to the power supply
- turn on the vacuum cleaner, immediately assessing its efficient operation.
5.4 Replacing the mist filter
For mist filter replacement , operate as indicated in chap. 5.3 replacing the redundant mist filter with a new
one
remove the filter, insert it inside a plastic bag, close it and dispose of it according
to the laws in force regarding the type of material being suctioned.
C
D