DEPURECO RAM 1000, Instruction And Maintenance Manual

Page: 105 / 113

26
Before starting any maintenance operation, the Maintenance technician must :
dissect all power supplies and put the vacuum cleaner in a safe lock
Warning!
If it is absolutely necessary to work with the power supply connected, when set forth
by current safety laws (in Italy, Legislative Decree 81/08), the maintenance technician
must keep a safe distance, have a stop button handy and never put hands in the drain
area.
At the end of the procedure and before returning to use, the maintenance technician must check that guards
are functioning correctly and the protection devices are intact.
Operations on the motors or on other electrical components must only be carried out by the specially trained
electrical maintenance technician authorised by the Chief Safety Officer.
Warning!
After any maintenance work, the Chief Safety Officer is required to check the safety
conditions of the
vacuum cleaner and of its safety devices.
Before every work shift
- Check that the power cord and the plug are not damaged: replace them immediately if there are any
signs of wear, using a cord of the same type (information c/o DEPURECO). This operation is the
sole responsibility of an electrician.
- Check the integrity of the safety symbols (pictograms) applied to the vacuum cleaner.
- Check the integrity of the flexible suction pipe and of the accessories to be used.
Warning!
The flexible suction pipe, if perforated, reduces the suction power and
disperses liquids.