DEPURECO RAM 1000, Instruction And Maintenance Manual

Page: 106 / 113

27
5.3
Cleaning the mist filter
To replace the mist filter , proceed as follows:
- switch off the machine
- disconnect the vacuum cleaner from the power supply
- disconnect the pump plug from the outlet on the electrical panel
- Release the closure hooks (A) on the vacuum head to release it from the hatch (to loosen the hooks,
turn the handwheel clockwise (A1))
- From the hatch, lift the vacuum head (B) and position it in a safe place to avoid damaging the pump.
Given the heaviness of the head, we recommend screwing an eyebolt in the housing on the pump
body for lifting and then using mechanical means to do the lifting. From the connector, lift the mist
filter support ring (C)
Warning!
Wear appropriate PPE (dust mask, latex gloves, goggles, etc.).
A
B
C
A1