SZG CONTROLLER 6 - ENGLISH
34
11.8
RFID
Bild 20: Reader with connection cable and three RFID tags
In menu section RFID the RFID tags (coded chips) can be programmed for all users. The user is shown at
the end of the line in brackets. Use buttons
and
to choose the required user number. The
corresponding RFID tag is then registered to the reader. The tag ID is displayed on screen. Press the button
to save the ID to the chosen user name.
After registering the IDs the user can be changed simply by holding the RFID tag briefly up to the reader.
Thereby the times for up to 10 users can be saved and the feeder can be set to adapt to each different user.
11.9
Inlet control / hose screw sensor
Bild 21: Various versions of sensors: Inlet control, prox. switch and hose screw sensor
Hand feeders can be equipped with additional controls for scanning feed parts. For example inlet control (in
the separator) and hose screw control (on hose just above mouthpiece). On double spiral bowls the same
type of control must be used on each side.
