Deprag 330EG36-0012, Operating Instructions Manual

Page: 22 / 32

12 Troubleshooting
In the event of malfunctions, check whether the instructions in the Safety Regulations and
the Operating Manual are being observed. If necessary, undertake suitable measures.
Possible faults are shown in following table:
Fault Solution
Display
not illumi-
nated
Check that the power cable is connected correctly. Check that the power unit is switched
on.
Screw-
driver
does not
start
Check Type of start setting
Display
only
shows
lines
The screwdriver is in display test mode or pressure test function mode. Follow the in-
structions in
7.6
Pressure test function
or 7.7
Display test
.
Tables 8: Fault solutions
If you discover that the screwdriver is defective, please send it to DEPRAG. Please do not
try to troubleshoot or rectify any electrical fault on your own under any circumstances
whatsoever.
22