Deprag 330EG36-0012, Operating Instructions Manual

Page: 19 / 32

The screwdriving step is recorded as NOT OK (errors present) if the angle or torque are
outside the set limits.
The following parameters are used in the screwdriving template:
• A1 - Speed: adjustable (10% to 100% of the maximum screwdriver speed)
• A2 – Shut-off angle: adjustable (0 to 990 *10 Grad)
• Minimum angle: shut-off angle - 10°
• Maximum angle: shut-off angle + 10°
• Minimum torque: 0
• Maximum torque: maximum torque of the screwdriver
• Maximum screwdriving time: 10 s
10 Maintenance and Upkeep
WARNING
Disconnect machine from the power supply before any disassembly,
maintenance or repair work!
Disassembly/assembly of the machine may only be carried out by
DEPRAG technicians.
Inspection and maintenance may only be carried out by trained electrical specialists. Incor-
rect assembly can lead to the risk of accidents for the operator and damages to the ma-
chine.
Please note that

the machine must be disconnected from the power network before any maintenance or
repair work.

the work area must be clean during all maintenance and repair work. Do not eat or
smoke whilst working on the machine.
If the following rules are adhered to the machine can be expected have a long life-span
and be constantly reliable in operation:

Regular inspection of the machine for external damages.

Worn or damaged bits should be replaced immediately. Damaged or broken bits can
cause accidents.
IMPORTANT
In normal operation (single shift operation) we recommend that the machine
should be returned to DEPRAG every 12 months for inspection, calibration
and cleaning.
If necessary the machine should be sent for inspection if there are any issues.
19