IMPORTANT
Differing assignments of the function buttons will be described in the appro-
priate places.
7.1.3 Display
The display shows results and the menu.
During normal operation the screw assembly results are shown on the display:
If assembly was OK, the torque result of the last screwdriving step of the assembly is dis-
played in the selected torque unit. If there were errors, the error number is displayed (see
...link).
If a system error occurs the text “Err” and a 3 digit error number are displayed alternately.
For error descriptions see ...link.
IMPORTANT
Differing displays are described in the appropriate places.
7.2. Screwdriver start
Depending on the selected torque mode, the MINIMAT-ED Digital Electric Screwdriver
starts by push-to-start or pushing the button .
To change between the screw assembly and loosening program press button
.
Program assignment:
fasten
1 2 3 4 5
loosen
6 7 8 9 10
7.3. Program selection / Torque setting
Depending on the torque mode selected (see
) a pre-set pro-
gram can be selected via program selection and the torque can be adjusted.
As follows:
• A short press on button
, both LEDs flash.
• Use the buttons
(-) and
(+) to select the required program / torque
• To quit program selection – a short press on button
, both LEDs go out and the
number of the currently selected screw assembly or loosening program is dis-
played (Pxx).
7.4. Menu operation
To access the menu press and hold button
, both LEDs go out and the current menu is
shown on the display (e.g. F01).
A short press of the button
changes the selected menu or selected parameter, a longer
press of the button
and you quit the selected menu or selected parameter.
Use the buttons
(-) and
(+) to select the required menu item or parameter.
12
Summary of Contents for 330EG36-0012
Page 7: ...6 Operation 6 1 Dimensional Drawing Illustration 1 Dimensional Drawing 7...
Page 30: ...Notizen Notes...
Page 31: ......
