SecurAccess SIP PMR – User Guide EN
42
Save configuration:
click on “Make” button to save the doorphone configuration in a file,
named ‘config.cfg’ and located in ‘Downloads’ directory of your browser.
Load configuration:
click on, a new page will open to select your configuration file, to restore a
saved doorphone configuration.
Load phonebook:
mark to include phonebook informations.
Load network and SIP:
mark to include network and SIP settings.
Load others:
mark to include other parameters.
Click on ‘
Make
’ button to restore the desired configuration.
7.3. Reset to factory settings
Hardware reset (Network settings) :
You can reset the doorphone IP settings, and restore those by default, by switching from ‘OFF’
to ‘ON’ the switch 2 located on the PCB (see §4.1 p 19) and then reboot the doorphone
(disconnect and reconnect the Ethernet cable PoE or the power supply).
The doorphone will be reachable with the IP address 192.168.1.250.
After reboot, switch from ‘ON’ to ‘OFF’ the switch 2.
Parameters reset via Web interface
:
Via the ‘Service’ page, select ‘Configuration’
, you can separately reset phonebooks, restore
default network settings and other settings by marking the option you want to modify.
Clear phonebook:
erase complete phonebook (all 999 possible forms).
Default network and SIP:
default IP address 192.168.1.250 and erase SIP settings.
Default others:
all remaining settings will return to factory settings.
This operation will erase the SecurAccess SIP PMR doorphone’s
parameters.
!
