SecurAccess SIP PMR – User Guide EN
36
6. Advanced configuration
6.1. DoorPhone
Via the ‘Extended settings’ page, select ‘DoorPhone’
:
Ringing timeout (sec):
on outgoing calls, time elapsed in case of no answer, including for
chain dialling numbers (before dialling the following number stored). This time can be adjusted.
Maximum call duration (sec):
talking time can be limited. When this field is empty there is no
talk time limit. When you enter a duration, 10 seconds before end of call the doorphone emits a
‘beep’ tone.
Prolongation key:
select * or #. During a call, when you hear the ‘beep’ tone, press the * or #
selected key to cancel the talk time limitation and to prolong the call of the maximum duration
here above.
Reject all incoming calls:
mark to deactivate incoming calls on the doorphone.
Ringing cycles count :
enter number from 1 to 9, setting for chain dialling. It defines the
repetition number (up to 9 times) of the dialling sequence of phone numbers stored into the
same phonebook page (dialling buttons or speed-dial numbers).
Same key pressed again :
in the drop-down menu, select ‘Cancel call’ or ‘Redial’ or ‘Ignore’
(nothing will happen). It defines the action when you press again the same dialling button.
Active button by HTTP
: mark to enable calls the doorphone from the dedicated PC software.
Dialling timeout (sec):
time elapsed before digits are dialled, in regular (direct) dialling mode.
DTMF dialling timeout (sec):
Keyboard Mode:
‘Direct dialling’
or ‘Choice number from memory’, see §4.5 p 29.
Camera light
: in the drop-down menu, select lighting options of camera LEDs. ‘OFF’: will never
light - ‘During a call’: are always lighted during a call, independently on surrounding light
