SecurAccess SIP PMR – User Guide EN
17
The ‘calling’
icon lights up and the ‘call in process’ voice message is played.
If the other party does not answer and if several numbers have been stored into this memory,
the unit will automatically dial the following number stored. If chain dialling is activated, the
sequence of number will be repeated several times.
It is also possible to make group callings, according to the dialling button setting.
The dialling, the chain dialling and the group calling can be managed by programmable calendar
control, to activate them according to time and day.
When the other party answers, the ‘talk’
icon lights up, the conversation will be held in the
‘speakerphone’ mode.
When the call is over, the SecurAccess SIP PMR will automatically hang up, or you can hang up
the unit by pressing again the off-hook/memory button.
2) By using the keypad
(manual dialling, only with keypad model)
The SecurAccess SIP PMR keypad can operate according to 2 selectable modes: (see §4.5
Keypad mode p 29)
-
regular dialling
, to call, simply dial a phone number thanks to the keypad and wait 4 seconds
(default pause, adjustable), the unit will automatically turn to ‘speakerphone’ mode and the
number will be dialled out.
IP address can be used to make a ‘P2P’ (peer to peer) call, if both phones are on a same
network segment.
When entering IP address, replace ‘.’ by ‘#’ (Eg: 192.168.92.100 =
192#168#92#100).
-
or speed dialling
, to call, simply dial a speed-dial number thanks to the keypad, the unit will
automatically turn to ‘speakerphone’ mode and the 1
st
stored phone number will be dialled out
(once the unit has been configured, see §5.1 Phonebook p 30).
Up to 999 speed-dial numbers can be stored in the SecurAccess SIP PMR phonebook, a very
useful feature for installations with a called party large number which can be called from the
doorphone.
According to the speed-dial numbers setting, it is also possible to make chain diallings or group
callings, managed or not by programmable calendar control, to activate them according to time
and day.
The ‘calling’
icon lights up and the ‘call in process’ voice message is played.
When the other party answers, the ‘talk’
icon lights up, the conversation will be held in the
‘speakerphone’ mode.
When the call is over, the SecurAccess SIP PMR will automatically hang up, or you can hang up
the unit by pressing a off-hook/memory button.
3.3. Answering a call
On incoming call, the doorphone automatically hangs up.
Once off-hook, the ‘talk’ icon lights up, the conversation will be held in the “speakerphone”
mode.
When the call is over, the SecurAccess SIP PMR will automatically hang up, or you can hang up
the unit by pressing a off-hook/memory button.
3.4. Automatic line disconnection
This may happen during the dialling process or during a conversation in the following cases:
1. When pressing again one of the off-hook/memory buttons
2. No answer duration elapsed
