SecurAccess SIP PMR – User Guide EN
35
Outgoing call
, relay is closed during an outgoing call
Both,
relay is closed during every call.
Acoustic tone:
by default ‘User defined’, it allows to play the digital voice announcements (for
disabled help recommendations). ‘Short’ disables the announcements playing and replaces them
with beep.
Active by HTTP:
by default marked, it allows to activate the relays thanks to the dedicated PC
software.
Security output code:
Direct ON button:
RC command at relay ON:
RC command at relay OFF:
Door codes
We can create
up to 6 different codes
for each relays (numbered lines from 1 to 6).
Code:
enter the desired code for door latch activation, from 1 to 10 digits.
Source:
select the activation mode, remotely from a tone (DTMF) telephone keypad or locally
by the door button of the doorphone (see p 7). If you want the 2 sources, enter twice the same
code in ‘Code’ fields, one for each of the sources.
On/Off:
activation/deactivation of the code with its source.
Timetable:
activate/deactivate the code by timetable control. In the drop-down menu, select
the timetable name you want to assign to the code, or ‘None’ for no timetable control.
You can proceed in the same way to program other door codes for this relay.
Click on
‘Save’
button to save modifications.
2) Repeat this process to program the
relay n°2
,
after clicking on the tab ‘2’ in the upper blue
banner.
Note : only tabs 1 and 2 are enabled.
5.5. Sensors
The SecurAccess SIP PMR is equipped with
2 relays sensors
(C/NC) (see connection p 11) for
connecting 2 delayed exit buttons, and for door latch electrical relays activation,...
Via the ‘Basic settings’ page, select ‘Door sensors’
:
Input door sensor 1 & 2 :
in the drop-down menu, select
‘Door sensor’, the censor is enable
or ‘Exit button - Relay x’ (1 by default) to add an exit button in order to activate the door latch
relay 1 or 2 (for opening door).
Click on
‘Save’
button to save modifications.
