SecurAccess SIP PMR – User Guide EN
25
Port
: 5060 SIP port.
Outbound proxy
: enter Proxy server IP address or name. Complete only if the outbound proxy
is different from the SIP server.
Port
:
SIP transport
: UDP/TCP mode for transmission packets.
Provisional code
: defines the SIP code during ringing, ‘180 ringing’ or ‘183 Session progress’.
Enable Symmetric RTP
: used by Cisco in particular.
Click on ‘
Save
’ button to save modifications.
4.3.5. SNMP
SNMP = Simple Network Management Protocol
Via the ‘Basic settings’ page, select ‘Setting SNMP’. The following settings will appear and can be
modified:
Enable SNMP:
mark to activate this protocol.
Community:
enter the SNMP user.
Admin address:
enter client IP address or domain name.
Variables in MIB tree:
set of organized informations about a network device (OID).
Startup: contact your network administrator.
Open sensor:
Sensor open timeout:
Open sensor for too long:
Entered invalid keycode:
Open relay:
Click on ‘
Save
’ button to save modifications.
Note:
OID is the digital identification allowing to definitively identify any value in SNMP
communication. OID is created by a sequence of numbers connected with dots. Each dot
represents one level in the MIB tree.
4.3.6. NTP, date and time settings
Via the ‘Basic settings’ page, select ‘Time setting’. The following settings will appear and can be
modified:
