66
A room measurement with automated EQ set, using the default settings
Notes:
•
The Autoset EQ defaults to ‘minimal disturbance’ by introducing only narrow bandwidth
filters at the frequencies with relatively subtle amplitude correction where maximum
deviation occurs. It is recommended to make manual manipulations of ‘Autoset’ levels
and bandwidths as music is playing in order to achieve personal preferences. If extra
profiles available, they can be used to store several versions of EQ.
•
When you correct a room measurement or measurements using the Autoset EQ function,
it actually uses exactly what you see, it doesn't go behind the visible shape of the room
measurement plot(s) to the 'original' room measurements. This means, for example, that
the Autoset EQ will provide a different correction if you don't smooth the measurements,
compared to the one it would provide if you do.
•
The automated EQ will only be applied at frequencies where
all
relevant room
measurements (not just one) need correction. The AutosetEQ will only correct at a
frequency if all measurements require the same sign of correction at that frequency.
For
example, if left and right measurements are both above 0 dB at a particular
frequency,
AutosetEQ will attempt to cut at that frequency. However, if left is below 0 dB and right is
above 0 dB at a particular frequency, AutosetEQ will do nothing at that frequency
Summary of Contents for DEQX-Cal
