DEOX DEQX-Cal, Installer Manual

Page: 13 / 143

13
Configuration Crossover Between Main
Speakers and
Subwoofer(s) Crossovers in Main
Speakers
Single Amp with Mono
Subwoofer 24 dB/octave at 100 Hz None
Single Amp with Stereo
Subwoofers 24 dB/octave at 100 Hz None
Bi-amp None 96 dB/octave at 2000 Hz
Bi-amp with Mono
Subwoofer 24 dB/octave at 100 Hz 96 dB/octave at 2000 Hz
Bi-amp with Stereo
Subwoofers 24 dB/octave at 100 Hz 96 dB/octave at 2000 Hz
Tri-Amp None 48 dB/octave at 500 Hz,
96 dB/octave at 2000 Hz
Open Default Project1.
First select from the file menu open project. My Documents or Libraries and navigate to your
documents folder and open the created DEQX folder and select Project1 file and select Open.
Click on the Configure icon . This starts the DEQX Configuration Wizard.
On the first window of the DEQX Configuration Wizard, click the Next button.
In the second window of the DEQX Configuration Wizard, select the 'Load an existing DEQX
configuration' radio button. This displays seven different pre-installed DEQX configurations.
Apart from the Single Amp configuration, all the configurations have crossovers already created,
between the main speakers and the subwoofer(s) and/or within the main speakers.
Click on the configuration that best matches your speaker system, then click Finish. This will
close the PDC Configuration Wizard and open the Configuration Window, showing your selected
configuration a configuration selected, prior to clicking the Finish button