139
The PDC is having trouble re-entering
filtering mode. This can be resolved by
turning the PDC off then on again.
Turn the unit off then on again and try again. If the
error message recurs, turn the unit off using the
power switch on rear, then, whilst holding down
the P3 button on the front panel, turn the unit back
on again.
The project file cannot be overwritten.
This may be due a sharing violation.
Another application is using the project file. Close
the other application and try again. Alternatively, it
may also not have the right permissions - it may
be Read-Only.
The file [FILENAME] is already
included.
You have attempted to insert a project that is
already loaded.
There was a problem creating the
name-library file, please select another
name.
It could be that the file already exists, or it was in
an invalid directory, or the directory permissions
were not good enough.
This will reset the current color palette When in the
Configuration
tab of the
Configuration Options
window: This is a warning
that if you click
OK
the current colors of the PDC
Configuration elements will be overwritten with
colors from the Windows color scheme.
When in the
Chart
tab of the
Configuration
Options
window: This is a warning that if you click
OK
the current colors of the Chart elements will
be overwritten with colors from the Windows color
scheme.
Click
Cancel
if you do not want this to occur.
To modify the parametric EQ settings,
please go to the Equalizer tab in the
PDC Control Panel
You attempted to access the parametric EQ
settings from within a PDC Configuration window.
Whilst the parametric EQ settings are summarised
in the Parametric EQ box on the PDC
Configuration window, they cannot be modified
there. To modify the parametric EQ settings, go to
the Equalizer tab in the PDC Control Panel. See
also
Saving Equalizer Settings
.
To use the auto-set feature, first drag
and drop some room measurements
onto the Equalizer, then press Autoset
again.
The auto-set feature works on room
measurements. The room measurement must be
in the Parametric Equaliser dialog window for the
auto-set feature to work. Drag and drop some
room measurements from the into the
Workspacve Explorer onto the Equalizer then
press AutoSet again.
Summary of Contents for DEQX-Cal
