99
Set the volume to an appropriate level to achieve a similar volume as measured by the
microphone as was achieved when the speaker was originally measured, using the Master
Volume control on the IO Manager. You may find that the Master Volume has to be set to a
different level than was used when the speaker was originally measured. This is because of the
cut or boost applied by the correction filter.
Click Run to start the verification measurement.
Summary of Contents for DEQX-Cal
