5 Commissioning
5.1 Putting the inLab 4 PC into operation
Dentsply Sirona
Instructions for Use Primeprint
34
67 45 173 D3691
D3691.201.01.01.02 04.2021
5
Commissioning
5.1
Putting the inLab 4 PC into operation
Observe the following steps in order to put the unit into operation using
the inLab 4-PC (optional).
5.1.1
Startup prerequisites
5.1.1.1
Required accessories
Supplied parts:
● inLab PC with power cable
● Keyboard
● Mouse
● Power cable
● Ethernet cable for connection of the machine with the PC.
Also required:
● PC monitor including corresponding monitor connection cable, such
as VGA, DVI, HDMI or display port cable (not included in scope of
supply)
CAUTION
Image may not display
Note the required minimum monitor resolution of 1920 x 1080 at
70 Hz. Refer to the technical documentation of the monitor for the
correct resolution and frame rate settings.
Recommendation:
● Sirona inLab system PC monitor, Order No.: 60 42 548 D3446
MSI
MSI
MSI
MSI
Example of monitor cable converter
Depending on the connection type of the monitor, the monitor cable
converters must be used (not included in scope of supply).