manualshive.com logo in svg

Dentsply Sirona Primeprint, Instructions For Use Manual, Page: 32 / 51

Share
Download
Dentsply Sirona Primeprint Instructions For Use Manual Download Page 32

4 Transportation and installation
4.4 Connecting the unit to the power supply and existing network

Dentsply Sirona

Instructions for Use Primeprint

32

67 45 173 D3691

D3691.201.01.01.02    04.2021

4.4

Connecting the unit to the power supply and
existing network

Connecting the unit to the power supply

Only use the power cord supplied in the package for connecting to the
mains. The unit must be connected directly to a fixed socket and must
not be bridged via an extension cable.

➢ Connect the unit to the power supply.

Connecting the unit to the network

➢ Integrate your unit into your existing network via the LAN "Ethernet"

connection. Use the network cable supplied for this and the LAN
switch delivered as an option if applicable.

4.5

Connecting to the PC via LAN

An Ethernet port is located on the rear of the unit, which can be used to
connect the PC to the unit. Use a network cable to do this (LAN
connection).

Using a network cable

Connect the unit with the network card of your PC using the provided
network cable.

IMPORTANT

If you wish to integrate the Primeprint unit into an existing network,
then please contact your responsible IT technician and follow
instructions for checking the installation.

Summary of Contents for Primeprint




















































Reviews:

No comments