Dentsply Sirona Midwest E Plus Operating Instructions Manual Download Page 17

66 04 206 D3686

D3686

.

201.01.01

.

02 08.2016

13

Sirona Dental Systems GmbH 

6 Follow-up

Operating Instructions Midwest E Plus

6.1 After each treatment session

båÖäáëÜ

6

Follow-up

6.1

After each treatment session

Immediately after treatment

NOTICE! Condition immediately, or at the latest, one hour after treatment.

Using the T1 spray

NOTICE! Only use Midwest® Plus Aerosol Spray.

Instruments _ bur instrument

The bur instrument must not be moving.

Wear appropriate protective clothing.

1. Purge the water and air channels on the treatment center for 30 

seconds.

2. Remove the bur instrument with tweezers.
3. Pre-disinfect directly at the treatment center [ → 14].
4. Detach the instrument from the motor.
5. Transport the instrument to the hygiene room in a suitable transport 

container.

6. Conduct automatic conditioning [ → 14]. Manual conditioning [ → 15] is 

possible in exceptional cases if the national/local regulations are 

followed.

7. Apply spray to the instrument [ → 15].
8. Sterilize the instrument and accessories [ → 17].

6.2

At the end of the work day

Instrument

➢ Apply spray to the instrument [ → 15].

Remove the motor at night

NOTICE! Do not leave any instruments on the motor overnight, in order 

to prevent oil from leaking into the electric motor. Never lubricate the 

electric motor.

Summary of Contents for Midwest E Plus









































































Reviews: