INSERT CONVERSION
For conversion of digit power
™
Regulators from and to any of the following configurations: ISO Threaded Connector; MIDWEST
®
Insert (Stylus
™
and XGT);
StarDental HiFlo
®
Insert; KaVo MULTIflex
®
Insert
• Step 1: If converting a coupler system to another coupler system skip to Step 3.
NOTE:
Coupler insert may vary from photos depending on configuration.
• Step 2: If converting an ISO threaded connector to a coupler system, remove the ISO connector from the bottom of the regulator using a wrench (not provided).
Turn counter clockwise to remove. Skip to Step 5.
• Step 3: If converting a coupler system to another coupler system, remove the old insert from the bottom of the regulator using the 5/32 hex key.
Turn counter clockwise to remove.
• Step 4: Important: Ensure that the o-ring on the coupler insert is also removed and not lodged inside the regulator body.
• Step 5: Thread the desired coupler insert into the bottom of the regulator using caution to avoid cross threading the parts. Turn clockwise to install.
• Step 6: Tighten the coupler insert using the 5/32 hex key. Turn clockwise to tighten.
ORDERING INFORMATION
digit power
™
Dispenser Accessories
INSERT CONVERSION KIT:
Includes 1 Insert, 1 Hex Key
678096 ISO Threaded Connector Insert
Compatible with ISO 4-hole, 5-hole fiber optic, and 6-pin dental hoses
678097 MIDWEST
®
Insert
Compatible with MIDWEST
®
Stylus
™
and XGT couplers (not ATC)
678098 KaVo MULTIflex
®
Insert
Compatible with KaVo MULTIflex
®
coupler
678099 StarDental HiFlo
®
Insert
Compatible with StarDental HiFlo
®
Swivel Connectors
678079 Disposable Barrier Sleeves
(50)
678091 Cap Refill
(1)
678092 Grip Refill
(1)
678093 Adapter Refill
(1)
678094 Air Supply Hose Refill
(1 Extra Long)
o-ring
Step 2
Step 3
Step 5
Step 6
Step 4
Manufactured by:
DENTSPLY Caulk
38 West Clarke Avenue
Milford, DE 19963 USA
Phone: 1-302-422-4511
www.dentsply.com
KaVo MULTIflex and StarDental HiFlo are not registered
trademarks of DENTSPLY International
©2013 DENTSPLY International. All rights reserved. Form #578054 (8/21/13)
