Powered by SD Electronics
24
−
Select Brightness then press OK or
►
button to enter brightness sub menu.
−
Press
◄
/
►
button to make the adjustment.
−
Press OK or LCD MENU button to confirm adjustment and go back to previous menu.
Note: Brightness only available for adjustment when in Personal picture mode.
7.2.4. Colour:
−
Select Colour then press OK or
►
button to enter colour sub menu.
−
Press
◄
/
►
button to make the adjustment.
−
Press OK or LCD MENU button to confirm adjustment and go back to previous menu.
Note: Colour only available for adjustment when in Personal picture mode.
7.2.5. Tint:
−
Select Tint then press OK or
►
button to enter tint sub menu.
−
Press
◄
/
►
button to make the adjustment.
−
Press OK or LCD MENU button to confirm adjustment and go back to previous menu.
Note: Tint only available for adjustment when in Personal picture mode and with NTSC signal source.
7.2.6. Sharpness:
−
Select Contrast then press OK or
►
button to enter contrast sub menu.
−
Press
◄
/
►
button to make the adjustment.
−
Press OK or LCD MENU button to confirm adjustment and go back to previous menu.
Note: Contrast only available for adjustment when in Personal picture mode.
7.2.7. Colour Temp (Colour Temperature):
−
Select Colour Temp Mode then press OK or
►
button to enter Colour Temp sub menu.
−
Press
▼
/
▲
button to select the colour temperature you desire. You can select these colour
temperature:
o
Cold
o
Normal
o
Warm
−
Press OK button to confirm selection. Press LCD MENU button to return to previous menu without
changes.
−
Press EXIT button to exit the OSD completely.
7.2.8. Noise Reduction:
−
Select Noise Reduction Mode then press OK or
►
button to enter Noise Reduction sub menu.
−
Press
▼
/
▲
button to select the noise reduction level you desire. You can set these level of noise
reduction:
o
Off / Low / Middle / High / Default
−
Press OK button to confirm selection. Press LCD MENU button to return to previous menu without
changes.
−
Press EXIT button to exit the OSD completely.
Note: Higher noise reduction level will cause movement inaccuracy of display.