manualshive.com logo in svg

Denso 400BW-CE, User Manual

Share
Download
Denso 400BW-CE User Manual Download Page 94

[2.4] ActiveSync 

(USB) 

Choosing "4:ActiveSync (USB)" on the Communication menu connects the BHT to the host computer 
via the USB interface port. 

 

Upon completion of connection, the screen shown at left appears. 

For details about the configuration of the host computer and
connection using ActiveSync, refer to Chapter 3, Section 3.5
"ActiveSync." 

 

 

 

The BHT can be setup so that ActiveSync, which allows connection with the host computer, begins 
automatically when the USB cable is plugged into the BHT when it is turned on. 

For further details, refer to Section 2.5.4, "[3.3] Device Menu".   

 

If ActiveSync connection succeeds 

 

 

If ActiveSync connection succeeds, the BHT beeps once and displays 
the ActiveSync icon (circled in red at left) in the task tray. 

 

 

If ActiveSync connection fails 

If ActiveSync connection fails, the BHT beeps once and does not display the ActiveSync icon. 

 

  

 

74

Summary of Contents for 400BW-CE





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands