Denso 400BW-CE User Manual Download Page 80

Page: 80 / 180

2.5.3 Operating in System Menu

On the desktop, double-tap

BhtShell

. System Menu starts up to display the following screen:

To run the items in System Menu, tap the desired item or press the corresponding numerical key.

To quit System Menu, tap the or button located in the top right corner of the window.

The keys below are so designed that the function of each key is consistent in every screen.

Numerical keys

Pressing a numerical key corresponding with a desired menu
number starts the desired item displayed on the screen.

ENT

key

Pressing this key executes the focused* item.

Tab key (assigned to the

key by default)

Pressing this key moves the focus.

C(CLEAR)

key

Pressing this combination returns to the immediately preceding
screen. **

Currently active item. On the screen above, the [1:Execute Program] is focused.

** The combination of the

C(CLEAR)

key is disabled on the following menus in Section 2.5.4,

"Detailed Description of the Functions in System Menu."

- [2.1] Ymodem Menu

[2.2]

ActiveSync

(Infrared)

[2.3]

ActiveSync

(Serial)

[2.4]

ActiveSync

(USB)

[2.5]

ActiveSync

(RF)

[ 3 ]

System Properties

- [ 5 ] Explorer

Summary of Contents for 400BW-CE





















































































































































































Search results

Summary of Contents for 400BW-CE

Reviews:

Brands by name

Popular brands

Denso 400BW-CE, User Manual

Search results

Summary of Contents for 400BW-CE

Reviews:

Brands by name

Popular brands