manualshive.com logo in svg

Denso 400BW-CE, User Manual

Share
Download
Denso 400BW-CE User Manual Download Page 134

 IP Information 

 

Tapping the 

IP Information

tab on the WZC Menu displays the 

screen shown at left. 

Internet Protocol (TCP/IP) settings information displays at this menu. 

Renew:  

When the IP address is set to be acquired 
from the DHCP server, tap the 

Renew

 button 

to reacquire the IP address from the DHCP 
server. 

When the IP address is set to be specified, 
information is not renewed even when the 

Renew

 button is tapped. 

 

 

 

 

 

Tapping the 

Details…

button on the IP Information tab displays the 

screen shown at left. 

Displays detailed information for the network settings. 

Physical Address:   Displays the MAC address for the BHT 

internal Network Interface Card. 

IP Address:  

Displays the IP address. 

Subnet Mask:  

Displays the subnet mask address. 

Default Gateway:   Displays the default gateway address. 

DHCP Server:  

Displays the DHCP server address. 

Lease Obtained:  

Displays the time and date at which the IP 
address was obtained from the DHCP server. 

Lease Expires:  

Displays the time and date at which the IP 
Address became invalid. 

DNS Servers:  

Displays the DNS servers address. 

WINS Servers:  

Displays the WINS servers address. 

 

Please refer to section 2.5.4 “Detailed Description of the Functions in 
System Menu [3.8] Radio Frequency” for details of settings for the IP 
address and so forth. 

 

 

 

114

Summary of Contents for 400BW-CE





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands