manualshive.com logo in svg

Denso 400BW-CE, User Manual

Share
Download
Denso 400BW-CE User Manual Download Page 113

Chapter 2  Getting Started the BHT and System Menu 

 

 

Tapping the 

Property

 button calls up the IP address setting screen. 

This property has the following tabs: 

  IP Address tab: 

Used to set the IP address. 

  Name Servers tab: Used to set the Name Servers. 

Tapping the 

IP Address

 tab on the property displays the screen 

shown at left. 

Obtain an IP address via DHCP: 

Select to obtain the IP address from the DHCP server. 

Specify an IP address: 

Select to manually specify an IP address. 

 

Please consult with the network administrator when setting
the IP address.

 

 

 

 

Tapping the 

Name Servers

tab on the property displays the screen 

shown at left. 

 

Primary DNS: 

IP address of Primary DNS 

Secondary DNS: 

IP address of Secondary DNS 

Primary WINS: 

IP address of Primary WINS 

Secondary WINS: 

IP address of Secondary WINS 

 

 

 

 

93

Summary of Contents for 400BW-CE





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands