© by DENQBAR GmbH
http://www.denqbar.com
59
4. Check spark plug visually. Dispose of plug in case of
damage or splittered places on the isolator.
5. Measure electrode intervals with an adequate gauge. The
interval should measure 0.6-0.7 mm.
6. Ensure that the sealing ring of the spark plug is in good
condition. Screw in spark plug by hand in order to avoid
tearing of the thread.
7. After screwing the spark plug in, tighten the plug with a
spark plug spanner to compress the sealing ring.
8. Replace plug back tightly onto the spark plug.
Attention!
The spark plug must be screwed in tight, otherwise it will get hot and can damage the generator.
Key for
spark plug
Ignition coil
