ENGLISH
43
16) “Date Disp OFF (ON)”
* Date Disp OFF
: Date not displayed even when NAME/CAPS button pressed.
Date Disp ON
: Date displayed when NAME/CAPS button pressed.
17) “Program 1 OFF (ON)”
Program 1 OFF (ON) : Store the contents of program 1 when on. (Initial setting – “OFF”)
18) “Program 2 OFF (ON)”
Program 2 OFF (ON) : Store the contents of program 2 when on. (Initial setting – “OFF”)
19) “Program 3 OFF (ON)”
Program 3 OFF (ON) : Store the contents of program 3 when on. (Initial setting – “OFF”)
20) “End Mon. (**)sec”
End Mon. (**)sec
: Set the end monitor time. (5/*10/15/20/25/30/35)
End Mon. OFF
: Do not use the end monitor function.
21) “E.O.M. (**)sec” (Output EOM tally signal to remote pint (24))
E.O.M. (**)sec
: Set the EOM time. (0/5/*10/15/20/25/30)
E.O.M. OFF
: Do not use the EOM function.
22) “End Cue (-*)sec” (Cue signal can be emitted before playback is completed.)
End Cue (-*)sec
: End cue time setting. (0/-1/*-2/-3)
23) “Next Stb.OFF (ON)”
* Next Stb.OFF
: Return to the play start position and standby when the STANBY/CUE button is pressed during playback.
Next Stb.ON
: Standby at the beginning of the next track when the STANDBY/CUE button is pressed during playback.
24) “PlayLock ON (OFF)”
PlayLock ON
: Inhibit all operations other than the PLAY/PAUSE, TIME and PLAY MODE buttons during playback.
* PlayLock OFF
: Enable all functions during playback.
25) “9600 (19200) bps”
*
0
9600 bps
: Set the baud rate to 9600 bps.
19200 bps
: Set the baud rate to 19200 bps.
26) “Switch ENA (INH)”
*Switch ENA
: Enable operation of all the switches on the front panel.
Switch INH
: Inhibit operation of all panel switches other than those used for presetting operations.
27) “Player ID (**)”
Player ID (**)
: Player ID setting.
(Set ID to OFF or 0 to 15. Default setting - “OFF”.)
28) “Fader Pause (Play)”
* Fader Pause
: Start playback when remote fader pins (9-10) are short-circuited and pause when pins are open.
Fader Play
: Start playback when remote fader pins (9-10) are short-circuited and continue playback when pins are open.
29) “Stereo (Mono)”
* Stereo
: Output L and R stereo signals from the output connector.
Mono
: Output mixed L and R signals from the output connector.
30) “Preset Clr? (Ini. Preset)”
Preset Clr?
: Clear the presettings (set to the initial factory values).
* Ini. Preset
: Presettings set to initial factory defaults.
31) “Ver. xxxx yyyy”
: Display the microprocessor version. (“xxxx yyyy” is a number.)
