ENGLISH
12
(3) Display
q
DISC NAME/TRACK NAME/DATE indicators
•
“DISC NAME” lights when the disc name is displayed on the
character display, “TRACK NAME” lights when the track
name is displayed, and “DATE” lights when the date is
displayed.
w
PROGRAM indicator
•
This lights when the Program play mode is set.
e
TRACK No. display
•
This displays the number of the track at the current position.
This also lights during the track search mode and when
switching to the standby mode.
r
Character display
•
This displays disc names, track names and the date.
•
Various instructions are displayed here during presetting,
programming, editing, etc.
t
Playing time display
•
This indicates the time of the current position, in minutes (m),
seconds (s) and frames (f).
y
PLAY MODE indicators
•
“A-B” lights when in the A-B play mode.
•
“SINGLE” lights when in the single track play mode.
u
TIME MODE indicators
•
“ELAPSED” lights when the elapsed time is displayed.
•
“REMAIN” lights when the remaining time is displayed.
i
NEXT No. display
•
This displays the number of the next track to be played.
o
TOC indicator
•
This lights when it is necessary to rewrite the TOC (UTOC)
due to editing, etc
•
This flashes while the TOC (UTOC) is being written.
!0
EDIT indicator
•
This lights when the edit mode is set.
!1
DIGITAL IN indicator
•
This lights (or flashes) when the digital input signal is
selected.
•
The indicator flashes when the digital signal is unlocked and
remains lit when the digital signal is locked.
!2
Sampling frequency display
•
This displays the sampling frequency of the digital output.
(When an optional FS converter is connected, the
sampling frequency can be set using the presettings.)
!3
Level display
•
This displays the playback level during playback, the input
level during recording.
!4
PITCH display
•
This indicates the set play speed in %.
!5
PLAY LOCK indicator
•
This lights when the PLAY LOCK is preset.
(See Page 43)
!6
REPEAT indicator
•
This lights when the repeat mode is set.
!7
EOM indicator
•
This lights when the EOM is preset, and starts flashing when
the EOM set time is reached.
!8
CUE indicator
•
This lights for approximately 3 seconds when the position at
which a cue signal is set is played.
•
The indicator flashes when the standby mode is set at a
position at which a cue signal is set.
!2
ANALOG OUT (BALANCED) connectors
•
These are active balanced outputs using XLR type
connectors.
•
Connect these connectors to the balanced analog input
connectors on an amplifier or console.
•
Pin layout:
U.S.A. & Canada
Europe , Asia & Others
1. Common
1. Common
2. Cold
2. Hot
3. Hot
3. Cold
•
Applicable connector: Cannon XLR-3-31 or equivalent
NOTE:
Do not short-circuit the hot or cold pin with the common
pin.
!3
LEVEL L/R controls
•
Use these controls to adjust the level of the audio signals
from the ANALOG OUT (BALANCED) connectors.
