background image

ENGLISH

34

3

Use the 

and 

ursor buttons to select the MP3

file you want to play, then press the PLAY (

1

) button or

ENTER button.

Playback starts.

The display can be switched between the single
elapsed time and the single remaining time by
pressing the DISPLAY button.
Programmed playback is not possible with MP3
discs.

To change the MP3 file

Press the STOP button, then use the 

and 

cursor buttons to reselect the desired MP3 file.

To set the random play mode

In the stop mode, press the RANDOM button.
Then press the PLAY (

1

) button or ENTER button.

To set the repeat mode

The repeat mode changes each time the REPEAT
button is pressed.

NORMAL 

Æ

TRACK REPEAT 

Æ

FOLDER REPEAT

To return to the initial disc information screen

Press the STOP (

2

) button, use the 

cursor

button to select “ROOT” at the upper right of the
screen, then press the ENTER button.
The screen in step 

1

reappears.

Remote control unit

Main unit

\

Remote control unit

\

ENTER

Remote control unit

NOTES:

The ADV-1000 is compatible with the “MPEG-1 Audio Layer 3” standards (sampling frequency of 32, 44.1 or 48 kHz). It is

not compatible with such other standards as “MPEG-2 Audio Layer 3”, “MPEG-2.5 Audio Layer 3”, MP1, MP2, etc.

It may not be possible to play some CD-R/RW discs due to disc properties, dirt, warping, etc.

The digital signals output when playing MP3 files are MP3 signals converted into PCM, regardless of whether the audio

output presenting is set to “normal” or “PCM conversion”. The signals are output with the same sampling frequency as

that of the music source.

In general, the higher an MP3 file’s bit rate, the better the sound quality. On the ADV-1000, we recommend using MP3 files

recorded with bit rates of 128 kbps or greater.

MP3 files may not be played in the expected order, since the writing software may change the position of the folders and

the order of the files when writing them on the CD-R/RW.

Manual search and programmed playback are not possible with MP3 discs.

When writing MP3 files on CD-R/RW discs, select “ISO9660 level 1” as the writing software format. This may not be

possible with some types of writing software. For details, refer to the writing software’s usage instructions.

With the ADV-1000 it is possible to display folder names and file names on the screen like titles. The ADV-1000 can display

up to 11 characters, consisting of numbers, capital letters, and the “_” (underscore) mark.

If recorded in a format other than “ISO9660 level 1”, normal display and playback may not be possible. In addition, folder

and file names including other symbols will not be displayed properly.

Be sure to add the extension “.MP3” to MP3 files. Files cannot be played if they have any extension other than “.MP3”

or if they have no extension. (with Macintosh computers, MP3 files can be played by adding the extension “.MP3” after

the file name consisting of up to 8 capital or numbers and recording the files on the CD-R/RW.)

Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If adhesive gets on the surface

of a disc, the disc may get stuck inside the ADV-1000 and be impossible to eject.

The ADV-1000 is not compatible with packet write software.

The ADV-1000 is not compatible with ID3-Tag.

The ADV-1000 is not compatible with play lists.

B

ROOT

FOL DE R  NAME  1

FOL DE R  NAME  2

FOL DE R  NAME  3

FOL DE R  NAME  4

FOL DE R  NAME  5

ROOT                            0

MP3  FILE  NAME  1   1

MP3  FILE  NAME  2   2

MP3  FILE  NAME  3   3

MP3  FILE  NAME  4   4

MP3  FILE  NAME  5   5

S INGLE   ELAPSED 

:  0 0 : 0 1

PLAY  MODE 

:  NORMAL

D I SC   I NFORMAT I ON

(6) MP3 Playback

2

There are many music distribution sites on the internet from which music files in MP3 format can be downloaded. Music
downloaded as instructed on the site and written onto a CD-R/RW disc can be played on the ADV-1000.
If music recorded on commercially available music CDs is converted on a computer into MP3 files using an MP3 encoder
(conversion software), the data on a 12 cm CD is reduced into about 1/10 the amount of the original data. Thus, when written
in MP3 format, the data of about 10 music CDs can fit onto a single CD-R/RW disc. A single CD-R/RW disc can contain over 100
tracks.

Values when 5-minute tracks are converted with a standard bit rate of 128 kbps into MP3 files and using a CD-R/RW disc
with a capacity of 650 MB.

Before operating the remote control unit! 

Be sure to set the DVD mode using 
the remote control mode selector 
buttons.

DVD

1

3

1

1

Load the CD-R/RW disc on which the MP3 format music
files have been written into this unit. (See page 17.)

When the disc is loaded in the ADV-1000, the disc
information screen appears.

If there are multiple folders, proceed to step 

2

.

If there are no folders on the disc (if the disc only
contains MP3 files), proceed to step 

3

.

All the folders recorded on the disc are displayed.
(The folders are not displayed by layer.)

2

Use the 

and 

cursor buttons to select the

folder containing the file(s) you

want to play, then press the ENTER button.

To change the folder

Use the 

cursor button to select “ROOT” at

the upper right of the screen, then

press the ENTER button. The screen in step 

1

reappears. Select the desired folder.

Remote control unit

ENTER

Remote control unit

B

ROOT

ROOT                           0

FOL DE R  NAME  1   1

FOL DE R  NAME  2   2

FOL DE R  NAME  3   3

FOL DE R  NAME  4   4

FOL DE R  NAME  5   5

DEC I S ION : ENTER BUTTON

S INGLE   ELAPSED 

:  - - : - -

PLAY  MODE 

:  NORMAL

SEL ECT :

D I SC   I NFORMAT I ON

VOLUME

ENTER

BAND

MODE

MENU

FUNCTION

DISPLAY

RETURN

INPUT MODE SURROUND

MUTE

SHIFT

CH

TU

TV/VCR

CH

VOL

SLEEP

ON

OFF

2

3

4

5

6

8

9

CLEAR

CALL

0

+10

7

1

STATUS

VCR POWER

VCR POWER

TV POWER

TV POWER

TV

VCR

NTSC/PAL

MEMO

POWER

POWER

CH

CH

CH

2,3

2,3

3

\

B

ROOT

FOL DE R  NAME  1

FOL DE R  NAME  2

FOL DE R  NAME  3

FOL DE R  NAME  4

FOL DE R  NAME  5

ROOT                            0

MP3  FILE  NAME  1   1

MP3  FILE  NAME  2   2

MP3  FILE  NAME  3   3

MP3  FILE  NAME  4   4

MP3  FILE  NAME  5   5

DEC I S ION : ENTER BUTTON

S INGLE   ELAPSED 

:  - - : - -

PLAY  MODE 

:  NORMAL

SEL ECT :

D I SC   I NFORMAT I ON

Summary of Contents for DHT-1000DV

















































Reviews: