Denon AVR-S900W, Service Manual

Page: 19 / 194

SPECIAL MODE
Special Mode Configuration Buttons (for AVR-X2100W)
b
No. 1 - 13 : Hold down buttons A, B and C at the same time and press the power button to turn on the power.
b
No. 14 ： Press the A and B buttons simultaneously while inserting the AC plug to turn the power on.
No. Mode Button A Button B Button C Contents
1 Version Display
(u-COM / DSP Error Display)
DIMMER STATUS -
Displays the version of firmware such as the main firm-
ware or DSP, etc. Errors that have occurred are displayed.
(See 21 page )
2 Protection History Display Mode
ZONE2
SOURCE DIMMER
STATUS Displays the protection occurrence history.
(See 50 page )
3 Check the Video/Audio pass
Mode
↑ ↑ ↑
This is a special mode for service confirmation used dur-
ing repair work to simplify the confirmation work for the
Audio channel/video channel.
(See 28 page )
4 Remote ID Setup Mode ↑ ↑ ↑
If there are multiple DENON AV receivers in the same area,
this mode stops the other AV receivers from being oper-
ated concurrently with this device.
(See 54 page )
5 TUNER step ↑ ↑ ↑
Enables reception STEP of the ANALOG TUNER to be
changed.
(See 53 page )
6 Operation INFO ↑ ↑ ↑
Displays the total operating time of the set, number of
times the power was switched on, and number of occur-
rences of each protection.
(See 52 page )
7
User Initialization mode
(Settings for the Installer Setup are
not initialized.)
TUNER
PRESET
CH -
TUNER
PRESET
CH +
-
Initializes backup data.
(Settings for the Installer Setup are not initialized.)
8
Factory Initialization mode
(Initialization includes settings for the
Installer Setup.)
ZONE2
SOURCE DIMMER
-
Initializes backup data.
(Initialization includes settings for the Installer Setup.)
9 Mode for preventing remote
control acceptance
TUNER
PRESET
CH +
ZONE2
SOURCE
-
Start this unit in the PANEL/REMOTE LOCK selection mode
so that PANEL LOCK and Remote Lock can be selected as
ON or OFF. (See 25 page )
10 PANEL LOCK mode
(with Volume)
↑ ↑ -
This function prevents reception of all keys/encoders
(including VOLUME) other than the power supply button
on the Front Panel.
11 PANEL LOCK mode
(without Volume)
↑ ↑ -
This function prevents reception of all keys/encoders
other than the power supply button and VOLUME encoder
on the Front Panel.
12 Panel Lock Release ↑ ↑ - Function for Releasing the PANEL LOCK
13 Protection pass mode
TUNER
PRESET
CH +
ZONE2
SOURCE
STATUS
Enables the power to be turned on when protection de-
tection is in the stopped state.
(See 55 page )
14 Forced USB All Device Write Mode
TUNER
PRESET
CH +
STATUS -
Mode used when this unit cannot be recovered.
Forcibly switches this unit to USB update mode.
(See 62 page )
MASTER VOLUME
SOURCE SELECT
ONLINE
MEDIA
PLAYER
Blu-ray CB L /S A T
3 2 1 4
ZONE2
ON/OFF
ZONE2
SOURCE
DIMMER S T A T U S
TUNER
PRESET CH
SETUP MIC AUX 1 - HDMI PHONES
QUICK SELECT
DIMMER
STATUS TUNER
PRESET CH -
TUNER
PRESET CH +
X
ZONE2
SOURCE
19
All manuals and user guides at all-guides.com