5. Protection Pass Mode
5.1. Actions
• This mode allows the power to be turned on without activating protections.
• This is the same as normal power-on, except that protections are not activated.
5.2. Operations
AVR-X2100W
· Hold down buttons "
TUNER PRESET CH +
", "
ZONE2 SOURCE
" and "
STATUS
" at the same time and press the power
button to turn on the power.
AVR-S900W
· Hold down buttons "
ZONE2 SOURCE
", "
TUNER PRESET CH +
" and "
TUNE +
" at the same time and press the power
button to turn on the power.
The device returns to the normal display after the following is displayed.
FLD
P r o t e c t i o n
P a s s
This is displayed for 5 seconds before returning to the normal display.
6. CX870 / CY920 Reboot mode
6.1. Actions
• The CX870 / CY920 is restarted after CX870 / CY920 hangup.
• The CX870 / CY920 can be restarted even in the network standby setting ("
Setup menu
" – "
Network
" – "
Network
" –
"
Always On
").
6.2. Operations
1. Turn on the button "
MAIN ZONE
" and set NETWORK as the input source.
2. Hold down buttons "
TUNER PRESET CH +
" and "
TUNER PRESET CH -
" for at least 3 seconds while the power is on.
3. FL display during CX870 / CY920 reboot
FLD
N e t w o r k
R e s t a r t
4. Returns to the normal display.
NOTE:
• The CX870 / CY920 Reboot operation is not accepted again for one minute after executing the reboot.
• Reception is prohibited during update, save and load.
55
All manuals and user guides at all-guides.com
Summary of Contents for AVR-S900W
Page 8: ...Personal notes 8 All manuals and user guides at all guides com...
Page 27: ...Personal notes 27 All manuals and user guides at all guides com...
Page 144: ...Personal notes Personal notes 144 All manuals and user guides at all guides com...
Page 166: ...ANODE CONNECTION 166 All manuals and user guides at all guides com a l l g u i d e s c o m...
