Denon AVR-S900W, Service Manual

Page: 29 / 194

3.4.6. Audio system confirmation items
fig. XX: See the block diagram of the fig.XXth.
Paths confirmation item Display Settings Contents of confirmation Remarks
1
Analog ( pass )
A 0 1 : A N A L O G P A S S
Input Source: CBL/SAT
Input Mode: ANALOG fixed
Sound mode: DIRECT
Amp assign: Surround Back
MAIN ZONE: ON
ZONE2: OFF
・Check the audio output.
・Check of Analog input ⇒ Speaker output.
Front L/R
（※ The input source can be switched to any source except CBL/SAT.）
2
DIGITAL
(MAIN)
A 0 2 : D I G I T A L
Input Source : CBL/SAT
Input Mode : DIGITAL fixed
Sound mode: MULTI CH STEREO
Amp assign : Surround Back
Speaker Config all Speaker=Small / SW=Yes(2ch)
MAIN ZONE ON
ZONE2 OFF
・Check the audio output.
・Check of Digital input ⇒ Speaker output.
Front L/R、 Center、 Surround L/R、Surround Back L/R
・Check of Digital(PCM) input ⇒ Preout output.
Front L/R、 Center、 Surround L/R、Surround Back L/R、Subwoofer
（※ The input source can be switched to any source except CBL/SAT.）
3
DIGITAL
(ZONE2)
A 0 3 : D I G I T A L - Z 2
Input Source : NETWORK
Input Mode : Auto
Sound mode: STEREO
Amp assign : ZONE2
MAIN ZONE: ON
ZONE2: ON
・Check the audio output.
・Digital(PCM) input ⇒ Speaker output
Surround Back (ZONE2) L/R
・Digital(PCM) input ⇒ Preout output
ZONE2 L/R
4
HDMI
A 0 5 : H D M I
Input Source : CBL/SAT
Input Mode : HDMI fixed
Sound mode: STEREO
Amp assign : Surround Back
MAIN ZONE: ON
ZONE2: OFF
・Check the audio output.
・HDMI input ⇒ Speaker output.
Front L/R
（※ The input source can be switched to any source except CBL/SAT.）
5
Analog AD
(MAIN)
A 0 6 : A D
Input Source : CBL/SAT
Input Mode : Analog fixed
Sound mode: MULTI CH STEREO
Vol -20dB
Amp assign : Surround Back
Speaker Config all Speaker=Small / SW=Yes(2ch)
MAIN ZONE: ON
ZONE2: OFF
・Check the audio output.
・Check of Analog input ⇒ Speaker output.
Front L/R、 Center、 Surround L/R、Surround Back L/R
・Check of Analog input ⇒ Pre OUT.
Front L/R、 Center、 Surround L/R、Surround Back L/R、Subwoofer
（※ The input source can be switched to any source except CBL/SAT.）
（※ Volume -20dB is the value when Relative settings are used. The value is 60
when Absolute settings are used）
6
Analog Amp Assign
(Amp Assign: ZONE2)
A 0 7 : A S S I G N - Z 2
Input Source : CBL/SAT
Input Mode : Auto
Sound mode: STEREO
Z2 Source : Source
Vol -20dB
Amp assign : ZONE2
MAIN ZONE: ON
ZONE2: ON
・Check the audio output.
・Check of Analog input ⇒ Speaker output.
Surround Back(ZONE2) L/R
・Check of Analog input ⇒ Pre OUT.
ZONE2 L/R
（※ The input source can be switched to any source except CBL/SAT.）
（※ Volume -20dB is the value when Relative settings are used. The value is 60
when Absolute settings are used）
7
Analog Amp Assign
(Amp Assign: Bi-Amp)
AVR-X2100W Only
A 1 1 : A S S I G N - B i A M P
Input Source : CBL/SAT
Input Mode : Auto
Sound mode: MULTI CH STEREO
Amp assign : Bi-Amp
MAIN ZONE ON
ZONE2 OFF
・Check the audio output.
・Check of Analog input ⇒ Speaker output.
Surround Back L/R
（※ The input source can be switched to any source except CBL/SAT.）
（※ Volume -20dB is the value when Relative settings are used. The value is 60
when Absolute settings are used）
8
Front Height
A 1 4 : F R O N T H E I G H T
Input Source : CBL/SAT
Input Mode : Auto
Sound mode: MULTI CH STEREO
Vol -20dB
Amp assign : Front Height
MAIN ZONE ON
ZONE2 OFF
・Check the audio output.
・Check of Analog input ⇒ Speaker output.
Surround Back L/R
（※ The input source can be switched to any source except CBL/SAT.）
・Check of PREOUT output.
（※ Volume -20dB is the value when Relative settings are used. The value is 60
when Absolute settings are used）
fig.07
fig.08a
fig.08b
fig.09a
fig.09b
fig.10a
fig.10b
fig.11a
fig.11b
fig.12
fig.13
fig.14a
fig.14b
29
All manuals and user guides at all-guides.com