Denon AVR-S900W, Service Manual

Page: 20 / 194

Special Mode Configuration Buttons (for AVR-S900W)
b No. 1 - 13 : Hold down buttons A, B and C at the same time and press the power button to turn on the power.
b No. 14 ： Press the A and B buttons simultaneously while inserting the AC plug to turn the power on.
No. Mode Button A Button B Button C Contents
1 Version Display
(u-COM / DSP Error Display)
DIMMER STATUS -
Displays the version of firmware such as the main firmware
or DSP, etc. Errors that have occurred are displayed. (See
21 page )
2 Protection History Display Mode
TUNER
PRESET
CH +
TUNE - TUNE + Displays the protection occurrence history.
(See 50 page )
3 Check the Video/Audio pass
Mode
↑ ↑ ↑
This is a special mode for service confirmation used during
repair work to simplify the confirmation work for the Audio
channel/video channel.
(See 28 page )
4 Remote ID Setup Mode ↑ ↑ ↑
If there are multiple DENON AV receivers in the same area,
this mode stops the other AV receivers from being oper-
ated concurrently with this device.
(See 54 page )
5 TUNER step ↑ ↑ ↑
Enables reception STEP of the ANALOG TUNER to be
changed.
(See 53 page )
6 Operation INFO ↑ ↑ ↑
Displays the total operating time of the set, number of
times the power was switched on, and number of occur-
rences of each protection.
(See 52 page )
7
User Initialization mode
(Settings for the Installer Setup are
not initialized.)
TUNER
PRESET
CH -
TUNER
PRESET
CH +
-
Initializes backup data.
(Settings for the Installer Setup are not initialized.)
8
Factory Initialization mode
(Initialization includes settings for the
Installer Setup.)
TUNER
PRESET
CH +
TUNE - -
Initializes backup data.
(Initialization includes settings for the Installer Setup.)
9 Mode for preventing remote
control acceptance
ZONE2
SOURCE
TUNER
PRESET
CH +
-
Start this unit in the PANEL/REMOTE LOCK selection mode
so that PANEL LOCK and Remote Lock can be selected as
ON or OFF. (See 25 page )
10 PANEL LOCK mode
(with Volume)
↑ ↑ -
This function prevents reception of all keys/encoders (in-
cluding VOLUME) other than the power supply button on
the Front Panel.
11 PANEL LOCK mode
(without Volume)
↑ ↑ -
This function prevents reception of all keys/encoders other
than the power supply button and VOLUME encoder on
the Front Panel.
12 Panel Lock Release ↑ ↑ - Function for Releasing the PANEL LOCK
13 Protection pass mode
ZONE2
SOURCE
TUNER
PRESET
CH +
TUNE +
Enables the power to be turned on when protection de-
tection is in the stopped state.
(See 55 page )
14 Forced USB All Device Write Mode TUNE +
ZONE2
SOURCE
-
Mode used when this unit cannot be recovered.
Forcibly switches this unit to USB update mode.
(See 62 page )
SETUP MIC AUX 1 - HDMI
MASTER VOLUME
BAND MODE DIMMER STATUS TUNE ZONE2 ON/OFF ZONE2 SOURCE
TUNER
PRESET CH
PHONES
MOVIE INFO MUSIC GAME PURE
CBL/SAT Blu-ray
2 3 4
ONLINE
1
QUICK SELECT
SOUND MODE
GAME
SOURCE SELECT
TUNE
－
DIMMER
STATUS ZONE2
SOURCE
TUNE +
X
TUNER
PRESET CH +
TUNER
PRESET CH －
20
All manuals and user guides at all-guides.com