page 9 • DENAGO
☐
Handlebar and saddle alignment: Make sure the saddle and handlebar stem are parallel to
the eBikes center line and clamped tight enough so that you can’t twist them out of alignment.
See Sections 3.B and 3.C.
☐
Handlebar ends: Make sure the handlebar grips are secure and in good condition, with no
cuts, tears, or worn-out areas. If not, have your dealer replace them. Make sure the handlebar
ends and extensions are covered or have plugs. If not, replace them before you ride.
If the handlebars have bar end extensions, make sure they are clamped tight enough so you
can’t twist them.
WARNING: Loose or damaged handlebar grips or extensions can cause you to lose
control and fall. Unplugged handlebars or extensions can cut you and cause serious injury
in an otherwise minor accident
VERY IMPORTANT SAFETY NOTE:
Please also read and become thoroughly familiar with the important information on the
lifespan of your eBike and its components in Appendix C on Page 64-71
E. First ride
When you buckle on your helmet and go for your first familiarization ride on your new eBike,
be sure to pick a controlled environment, away from cars, other cyclists, obstacles, or other haz-
ards. Ride to become familiar with the controls, features, and performance of your new eBike.
Familiarize yourself with the braking action of the eBike (see Section 4.C). Test the brakes at slow
speed, putting your weight toward the rear and gently applying the brakes, rear brake first.
Sudden or excessive application of the front brake could pitch you over the handlebars.
Applying brakes too hard can lock up a wheel, which could cause you to lose control and fall.
Skidding is an example of what can happen when a wheel locks up.
If your eBike has toeclips or clipless pedals, practice getting in and out of the pedals.
See Section 1.B and 4.E.
If your eBike has suspension, familiarize yourself with how the suspension responds to brake
application and rider weight shifts. See paragraph B.6 above and Section 4.F.
Practice shifting the gears (see Section 4.D). Remember to never move the shifter while pedaling
backward, nor pedal backwards immediately after having moved the shifter.
This could jam the chain and cause serious damage to the eBike.
Practice and use in a controlled and safe environment the E-features of the throttle & monitor to
understand how to add the motorized speed and the impacts and effects it has on all aspects of the eBike
features from comfort, to handling, and breaking. Be comfortable and safe, if not consult BIKE.com at
[email protected] or call at 1-(877)-755-2453(BIKE) or ask your dealer
If you have any questions, or if you feel anything about the eBike is not as it should be, consult BIKE.com
at [email protected] or call at 1-(877)-755-2453(BIKE) or ask your dealer your dealer before you ride again.