background image

page 59 • DENAGO

All Mountain

CONDITION 4 
Ebikes designed for riding Conditions 1, 2, and 3, plus rough technical areas, 
moderately sized obstacles, and small jumps.

INTENDED
For trail and uphill riding. All-Mountain Ebikes are: (1) more heavy duty than cross country 
Ebikes, but less heavy duty than Freeride Ebikes, (2) lighter and more nimble than Freeride 
Ebikes, (3) heavier and have more suspension travel than a cross country Ebike, allowing them 
to be ridden in more difficult terrain, over larger obstacles and moderate jumps, 
(4) intermediate in suspension travel and use components that fit the intermediate intended 
use, (5) cover a fairly wide range of intended use, and within this range are models that are 
more or less heavy duty. Talk to your retailer about your needs and these models.

NOT INTENDED
For use in extreme forms of jumping/riding such as hardcore mountain, Freeriding, 
Downhill, North Shore, Dirt Jumping, Hucking etc. No large drop offs, jumps or launches 
(wooden structures, dirt embankments) requiring long suspension travel or heavy-duty 
components; and no spending time in the air landing hard and hammering through obstacles.

TRADE OFF
All-Mountain Ebikes are more rugged than cross country Ebikes, for riding more difficult terrain. 
All-Mountain Ebikes are heavier and harder to ride uphill than cross country Ebikes. 
All-Mountain Ebikes are lighter, more nimble, and easier to ride uphill than Freeride Ebikes. 
All-Mountain Ebikes are not as rugged as Freeride Ebikes and must not be used for more 
extreme riding and terrain.

RIDER

LUGGAGE*

TOTAL

lbs / kg

lbs / kg

lbs / kg

300 / 136

5 / 2.3

305 / 138

MAXIMUM WEIGHT LIMIT

* Seat Bag Only

Summary of Contents for Model 1














































































Reviews: